Product Description:

The 2AD180C-B35OB1-BS23-D2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat and included in the 2AD 3-Phase Induction Motors series. It converts three-phase supply energy into mechanical rotation for spindles, conveyors, and positioning axes controlled by frequency inverters. The motor uses length code C for the lamination stack, which places it in the continuous output range intended for this frame. Its BS winding code matches the electrical characteristics expected by compatible drive controllers, helping confirm thermal behavior and current response during operation.

The unit uses an axial blower on the non-drive end to force air through the housing fins and keep the windings within their temperature limit during continuous duty. The motor uses heavy-duty roller bearings that handle elevated radial loads while maintaining stable running characteristics. Position and speed are reported to the inverter through high-resolution motor feedback, allowing tight velocity control without an external encoder. The housing supports flange and foot mounting, so the motor can be installed on a machine face or on a base. Power conductors terminate in a terminal box, and the cable exits toward side B for orderly routing in enclosed equipment.

An electrically released brake is integrated for controlled holding when the drive is disabled, and it releases automatically when excitation current is applied. Dynamic balance quality meets vibration grade R, which helps reduce the transfer of oscillation to nearby machine components at rated speed. The power terminals are on the top of the housing, and that layout works with the side-B cable exit to keep wiring compact. With frame size 180, the motor uses the shaft and housing proportions associated with this class. The shaft is sealed and balanced with the full-length key, and there is no shaft end on side B.