Product Description:

Bosch Rexroth Indramat manufactures the 2AD180C-B35OB1-BS23-B2V1 as part of the 2AD 3-Phase Induction Motors series. It is an AC induction motor intended for machine tools, printing lines, and other automated stations that need constant torque from a mains-supplied drive. The size code 180 indicates the frame diameter, while length code C gives the stack length used for this version. This combination places the motor in a larger housing for demanding industrial duty. In production equipment, this motor type is often used where steady output and durable operation are more important than rapid axis indexing.

The cooling circuit uses an axial blower that forces air along the housing ribs to keep winding temperature within limits during cyclic duty. For prolonged radial loads, the shaft runs on heavy-duty bearings, which help limit vibration under demanding mechanical service. The motor uses an electrically released brake that clamps the rotor when power is removed, so the shaft can be held at standstill when needed. Position data are relayed through high-resolution motor feedback, giving the drive controller the signal quality needed for precise velocity regulation. That feedback also supports stable low-speed operation where open-loop induction motors can show larger speed error. The housing supports flange and foot mounting, allowing the motor to fit machine layouts that require either base mounting or face mounting.

The power leads exit through the upper housing and enter a sealed terminal box on side B, which keeps field wiring protected and compact. At the opposite end, the motor is supplied without a shaft end, which suits layouts where that side is reserved for other components. The vibration severity corresponds to grade R, which supports smooth running in precision equipment. The BS winding code identifies the electrical winding arrangement for this motor version, and the shaft is supplied without a shaft seal to reduce drag at higher speeds.