Product Description:

The 2AD180C-B35OB1-BS21-B2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In automated machining centers, packaging lines, and material-handling stations, such motors convert drive controller commands into rotational motion for pumps, spindles, and transport rollers. The 2AD180C-B35OB1-BS21-B2V1 combines integrated cooling and braking features, so it can serve axis groups that demand continuous torque while still stopping safely when the control system removes power.

It uses heavy-duty bearings that tolerate radial and axial loads during rapid speed changes. An electrically released holding brake remains engaged during idle or emergency stops and disengages only when the controller energizes its coil. Heat is carried away by an Axial Blower, allowing rated current to be supplied without relying on ambient airflow from the cabinet. With frame designation 180, the motor uses the corresponding stator outside diameter, and length code C pairs it with a medium stator stack. The motor uses flange and foot mounting, so it can bolt directly to a machine base or to a gear housing, reducing adapter plates and alignment time.

Connections are made through a terminal box located on the housing. Power leads enter this box from the top, and once inside, the terminals are oriented toward side B, simplifying loop-through wiring on multipart installations. Dynamic stability is classified as vibration grade R, matching balance quality requirements for medium-speed machine tools. The BS winding aligns the stator with standard 400-volt drives, the keyed shaft is balanced with the entire key, and the rear of the rotor has no shaft extension, so encoders or auxiliary loads cannot be fitted there. The unit is delivered without a shaft seal, so external seals can be selected for the specific lubricant or washdown environment present on the production floor.