Product Description:

The 2AD180C-B35OB1-BS13-D2V1 three-phase motor is produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It is an AC induction drive intended for continuous duty in automated machine tools, packaging lines, and material-handling axes where a constant torque source is required. By converting electrical power to rotational motion with squirrel-cage rotor construction, the unit provides the primary mechanical energy for servo drive systems that rely on frequency inverters for speed regulation.

Mechanical durability starts with heavy-duty bearings, selected to tolerate radial and axial forces that occur during aggressive acceleration profiles. For controlled stopping and load holding, an electrically engaged clamp brake is integrated to help restrain the shaft when required. Thermal management is handled by an axial blower, which directs airflow along the stator frame to maintain permissible winding temperatures during prolonged high-current cycles. Position accuracy for the drive regulator is improved by high-resolution motor feedback, permitting fine speed loops and rapid detection of load disturbances. Installation flexibility is supported by flange and foot mounting, so the same frame can be fixed either to a machine base or to a vertical panel without adapter plates.

All power conductors terminate in a terminal box, and routing is simplified because the designated connection face is at the top, keeping cable bends to a minimum in floor-level cabinets. Feeds exit the housing on side B, so signal cables can be kept separate from mains wiring for lower electromagnetic interference. The shaft uses a balanced key shaft with a shaft seal, protecting internal lubrication while allowing keyed coupling to gearboxes or pulleys. The motor has vibration grade R, which indicates balancing suitable for high-speed applications. Size code 180 and length code C indicate the active core dimensions used when pairing the motor to existing 2AD stators.