Product Description:

The 2AD180C-B35OB1-BS13-A2N1 belongs to the 2AD 3-Phase Induction Motors series produced by Bosch Rexroth Indramat. Designed for integration with frequency-controlled drives, this three-phase AC motor supplies regulated mechanical power to transfer lines, gantry axes, and forming equipment inside automated factories. Its asynchronous architecture allows slip-based torque development, making it a common choice for feed spindles and auxiliary axes that require continuous duty while maintaining compatibility with the manufacturer’s drive controllers. It is suited to applications that need steady torque delivery across a wide speed range under closed-loop drive control.

Cooling is handled by an axial blower, so airflow runs along the stator and removes heat without external ductwork, supporting higher continuous current. The integrated brake is an electrically engaged clamp brake, meaning the rotor is locked when holding voltage is applied to prevent drift on vertical loads. Installation flexibility comes from flange and foot mounting, allowing either face or base attachment to machine frames. Position control is enabled by high-resolution motor feedback, which sends fine-increment rotor data to the drive for smooth vector regulation. The size code 180 refers to a stator outside diameter near 180 mm, giving the unit the torque margin needed for mid-range tools. Bearings use the standard precision class, the C length code fixes the body depth, and power cabling exits toward side B to keep terminals clear of moving parts.

Incoming conductors terminate in a terminal box on the top of the frame, keeping service loops short and shielding the connectors from floor debris. The driven end uses a smooth shaft without a seal, chosen to minimize friction, and the opposite end has no shaft extension to keep the assembly compact. Rotor balance conforms to vibration grade R, which is suitable for medium-speed axes with limited residual imbalance. The BS winding pattern sets wire gauge and turn count for the rated supply group, and the missing shaft seal further reduces mechanical losses.