Product Description:

The 2AD180C-B35OB1-BS07-B2V1 is an AC induction motor built by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. It is intended for integration into automated machinery that requires steady rotary output for driven axes and process equipment. In operation, the motor converts three-phase electrical power into continuous torque for conveyor drives, printing presses, and other general motion applications.

Cooling is provided by an axial blower mounted on the housing, which forces air along the stator and rotor to help maintain stable operating temperature during continuous duty. Position and speed are reported to the drive through digital feedback with a multi-turn absolute encoder, allowing closed-loop control after power cycles. The unit uses motor size code 180, which gives it a shaft center height suited to mid-range gearbox combinations. The housing supports flange and foot mounting, so the motor can be fixed to a base or attached directly to a machine surface. Power conductors terminate in a sealed terminal box on top of the stator housing, keeping mains wiring separated from feedback and brake connections.

Service life is supported by heavy-duty bearings, which are intended to handle the radial and axial loads created by pulleys or couplings. The motor is supplied without a holding brake, so braking torque must come from the inverter or an external mechanical stop when the axis is at rest. Running behavior remains stable within vibration grade R, which helps limit oscillation that could affect connected equipment. The stator uses winding code BS for electrical matching, and the C length provides the active stack needed for the required torque. Power enters from the top toward Side B, where no shaft end is present, and the keyed drive end is supplied without a shaft seal to reduce friction losses.