Product Description:

The 2AD180C-B35OB1-BS07-A2N1 is manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It serves as a main drive element in automated machining centers, packaging lines, and material-handling equipment, where consistent torque and closed-loop speed control are required for reliable production throughput. Its induction motor design suits applications that run through repeated starts, speed changes, and extended operating cycles. The frame follows the 180 size code, and the motor uses length code C to provide a longer active iron stack in this housing.

A rear-mounted axial blower forces ambient air across the stator and winding assembly so continuous ratings can be reached without external ducting. Position and speed are reported through digital feedback that includes a multi-turn absolute encoder, allowing the controller to recover the exact shaft angle after power loss. The rotor is supplied without a holding brake, so static load retention must be provided by the drive or by the machine mechanism. Electrical power enters through a top-mounted terminal box, which supports downward cable routing and keeps the connection point accessible. This arrangement is useful in enclosed machine layouts where clear cable paths help reduce interference with adjacent components.

The flange and foot mounting arrangement allows the motor to be secured to vertical panels or horizontal bases without adapters. The output side uses a smooth shaft without a shaft seal, which suits direct-coupled loads, while Side B remains closed because no shaft end is provided there. Dynamic behavior meets vibration grade R, supporting operation on machines with moderate balance requirements. Thermal and electrical characteristics are identified by winding code BS, which indicates the coil variant used for compatibility with standard Rexroth servo inverters. Power conductors exit on the motor’s top plane toward Side B, which helps keep cable routing orderly in compact installations.