Product Description:

The 2AD180C-B35OB1-BS06-D2V1 AC induction motor is produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This design integrates stator windings, rotor assembly, and cooling hardware into a compact frame suited for drive packages that rely on field-oriented control. Within automated machine tools, printing lines, or material-handling axes, the motor converts electrical energy into continuous rotational torque that can be regulated through drive software. By pairing with a digital drive, the unit supplies the mechanical output needed for coordinated multi-axis motion.

The frame is identified by motor size code 180, while the length code C extends the active iron stack for greater torque density. An axial blower mounted on the housing pushes air along the stator to remove heat, allowing continuous duty without external ducting. Position data is returned through digital servo feedback, so the drive can inject current with precise phase alignment. The motor supports flange and foot mounting, giving flexible installation when coupling to gearboxes or baseplates. Terminations are made inside a top-mounted terminal box, which shields power cables from coolant or debris.

The remaining features address cable routing, shaft balance, and load capacity. The power conductors exit on side B, simplifying cabinet layout when the machine interface is on that end of the shaft. For low noise and smooth acceleration, the rotor is balanced together with a shaft seal and full key, while the missing shaft extension on side B leaves room for external encoders or brakes. The bearing arrangement uses heavy-duty bearings, enabling radial loads generated by belts or pinions. The motor uses winding code BS, and overall vibration conforms to grade R, so it can meet restrictive plant vibration limits. The unit is supplied without a holding brake, making it suitable for applications that coast to rest or use an external brake.