Product Description:

The 2AD180C-B35OB1-BS06-D2N1 is an AC induction motor from the 2AD 3-Phase Induction Motors series by Bosch Rexroth Indramat. It is intended for direct use with servo inverters, where it converts three-phase electrical input into controlled mechanical rotation for conveyors, processing lines, and multi-axis automation systems. Closed-loop operation lets the drive regulate torque and speed with consistent response during changing load conditions. Standard bearings support the rotor to reduce friction and support long operating periods with routine maintenance intervals.

Cooling is provided by an axial blower that moves air along the housing to remove heat from the stator windings during continuous operation. Position and speed are monitored through digital servo feedback, allowing the drive to correct slip and maintain accurate tracking. The motor supports flange and foot mounting, so it can be attached to machine frames in either face-mounted or base-mounted layouts. Power conductors enter through a sealed terminal box placed on side B of the stator, and the top cable-gland arrangement helps keep wiring clear of moving components and contamination. Winding code BS identifies the conductor layout and insulation arrangement used for this version.

The motor is supplied without a holding brake, so any static load must be secured by the drive or by external clamping hardware when power is removed. It belongs to frame size 180 and uses the compact C length, which gives a substantial motor envelope without excessive installation depth. A keyed shaft with a shaft seal and full-key balancing transfers torque to the driven machine, while the opposite side is produced without a second shaft end. Compliance with vibration grade R helps keep running behavior within limits suited to precision equipment and extended service use.