Product Description:

The 2AD180C-B35OB1-BS06-B2V1 is an AC induction motor built by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. This motor converts three-phase electrical energy into controlled rotational torque for conveyor drives, metal-cutting machines, and other automated axes that need continuous-duty operation in industrial plants. It is suited for applications that require dependable torque output during extended operating cycles.

The electromechanical design relies on heavy-duty bearings that tolerate high radial and axial forces during prolonged cycles. Forced ventilation is delivered by an integrated axial blower, so the rated thermal load can be maintained even at low shaft speeds. Rotor position and speed are relayed to the drive through digital servo feedback, enabling closed-loop current and torque control. Mechanical attachment is flexible because the frame supports flange and foot mounting. Power conductors exit the housing on side B, positioning cables away from the driven machine.

The main terminals are grouped in a roof-mounted terminal box, which grants top entry for mains and ground leads and reduces the risk of coolant splash ingress. On the secondary face, the rotor is delivered without a shaft end, allowing the unused side to remain closed when torque is transmitted only from the primary shaft. The drive-end shaft is specified without a shaft seal and is balanced with its full key to minimize runout. Dynamic quality is classified as vibration grade R, matching precision mounting surfaces. The dimensional codes indicate a motor size of 180, a length code of C, and a winding code of BS, which helps match the motor to the correct inverter rating. The unit is supplied without a holding brake, so external mechanical holding or drive torque must secure the load during power-off conditions.