Product Description:

The 2AD180C-B35OB1-BS06-A2N3 is manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Serving as the driveline element in presses, conveyors, and packaging stations, the unit converts electrical energy into controlled shaft rotation under vector drive supervision. Its rotor is energized through the AC induction principle, allowing continuous operation on three-phase supplies without the maintenance demands of brushed machinery. This arrangement supports stable industrial duty where repeatable speed control and steady torque delivery are required across changing load conditions.

Cooling is delivered by an integrated axial blower that forces air along the stator ribs to hold winding temperature within limits. Speed and position data travel over digital servo feedback, giving the controller real-time resolution for closed-loop regulation. Frame size 180 and length code C indicate a motor built for midsize production equipment. Standard bearings support the shaft and help maintain smooth rotation during repeated starts and stops. Installation flexibility is provided by flange and foot mounting surfaces that accept either face or base bolts. Incoming power terminates in a terminal box located on the top of the housing, and the cable gland points toward Side B to separate high-current conductors from signal lines.

For stop-and-hold tasks, the design ships without a holding brake, so any required static retention must be delivered by the drive or external clamps. The output journal is a smooth shaft without a seal, and the opposite side carries no additional shaft end, simplifying coupling to reducers or belt pulleys. Operating balance meets vibration grade S1, which helps limit transmitted oscillation during normal machine operation. Thermal constants and current limits correspond to the BS winding code, so the matching inverter can be selected around the motor's electrical characteristics.