Product Description:

The 2AD180C-B35OB1-BS03-D2N1 is an AC induction motor built by Bosch Rexroth Indramat and supplied in the 2AD 3-Phase Induction Motors series. As an induction machine, it converts three-phase electrical power into mechanical torque for tasks such as conveyor drive, spindle rotation, and general positioning in automated cells or machine tools. The motor has length code C in the 2AD range, which balances torque output with installation space, and it interfaces with drives through a terminal box mounted on the housing.

Heat is removed by a forced-air system that relies on an axial blower, and this airflow passes along the stator laminations so the windings remain within their thermal class during continuous duty. All conductors enter the housing through the top power entry, which simplifies cable runs in vertical panels. Installation flexibility is provided by flange and foot mounting, enabling either end-shield or base fixation to machine frames. For closed-loop velocity and position control, the motor carries high-resolution motor feedback, so the drive can correct speed deviations quickly during changing load conditions. The rotor is balanced to vibration grade R, which helps limit displacement amplitudes and reduce stress on adjacent bearings and couplings.

The frame size of 180 establishes the mechanical center height and shaft diameter used to mate with standard gearboxes. Internal rolling elements use standard bearings, giving a service life appropriate for 50/60 Hz continuous operation. Because the unit is supplied without a holding brake, any static load retention must be provided by the drive or an external clamp. A keyed shaft with a shaft seal keeps lubricant inside the housing and helps prevent airborne contaminants from entering the bearing cavity. Power terminals are oriented to side B of the frame, the non-drive end lacks a shaft extension, and winding code BS indicates the copper fill used to match motor impedance with typical Rexroth drive inverters.