Product Description:

The 2AD180C-B35OB1-BS03-C2N1 is a three-phase induction motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It serves as a line-powered drive element that delivers constant or variable torque to conveyors, spindles, and auxiliary axes in industrial automation. The motor fits new or retrofit systems that require reliable operation and compatibility with common Rexroth drive platforms. It is intended for continuous industrial motion tasks where stable torque delivery and durable mechanical construction are required.

An internal axial blower moves air along the stator to remove heat, so the motor maintains rated current without external ductwork. Position data are sent through high-resolution motor feedback, which enables the drive controller to apply closed-loop corrections at fine angular increments. This improves speed regulation during load changes and low-speed operation. The frame is identified by size code 180, supporting mid-range power density while keeping overall mass manageable. Installation flexibility is increased through flange and foot mounting, allowing either face bolts or base bolts to secure the housing. A smooth shaft with a shaft seal is provided, and the seal limits contaminant ingress at the output journal while the smooth surface supports clamped hubs or shrink discs.

Power conductors enter a terminal box located on the top of the housing and are routed toward side B, simplifying cable runs inside overhead cable trays. The motor is balanced to vibration grade R, which is suitable for general industrial duty. It has length code C, and winding code BS is used with typical 400 V class inverters. The motor is delivered without a holding brake, uses standard bearings for general-purpose duty, and has no shaft end on side B to accommodate inline fan attachments or belt tensioners. This arrangement supports conventional machine layouts that use direct coupling or accessory drives.