Product Description:

The 2AD180C-B35OB1-BS03-B2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It converts electrical energy into rotary motion for machine tools, packaging lines, and other automated stations that need continuous torque from an AC supply. The mechanical frame follows motor size code 180, and the length designation C indicates the stator iron volume and mounting face dimensions.

The drive train is supported by heavy-duty bearings that tolerate axial and radial loads generated during rapid acceleration or belt tension. Cooling air is forced through the housing by an integrated axial blower, so thermal limits are maintained even at sustained high output. Position data are supplied to the control system through high-resolution motor feedback, enabling tight speed regulation and low-speed crawl functions. Installation versatility is increased by flange and foot mounting, allowing the motor to be bolted either to a machine base or to a vertical plate without additional brackets.

Main power is routed into a terminal box that sits on the top of the stator and is oriented toward Side B, simplifying cable runs inside compact enclosures. The motor is supplied without a holding brake, so braking or load holding must be achieved by the drive or an external mechanical element. Dynamic balance is verified to vibration grade R, reducing transmitted structure-borne noise when the rotor turns at nominal speed. Electrical characteristics are linked to winding code BS, which indicates the conductor size and coil count used for the required voltage and frequency. The motor has a keyed shaft that is balanced without a shaft seal, an unused rear shaft end, and an upper-side connection direction that points conductors toward the control cabinet.