Product Description:

The 2AD180C-B35OB1-BS03-A2N3 is an AC induction motor built by Bosch Rexroth Indramat and belongs to the 2AD 3-Phase Induction Motors series. Within automated machining centers, printing presses, and material-handling lines, this motor converts electrical power into rotational motion that can be tightly coordinated by a drive controller. Built for industrial automation, it provides the electromechanical interface required for continuous duty while remaining compatible with modular control platforms.

The motor employs an axial blower that forces air lengthwise through the frame so temperature rise remains within limits during heavy cycling. Position and speed are reported to the drive by an integrated high-resolution motor feedback unit, enabling precise closed-loop control without additional encoders. Installation is adaptable because the housing supports flange and foot mounting, allowing the shaft centerline to be fixed on either a base plate or a machine wall. Incoming power is routed through a terminal box mounted on top of the frame, with conductors directed toward side B to keep cable runs away from service areas. The 180 frame size code indicates the active stator diameter and the torque range available for this model, while standard bearings manage radial and axial loads.

A smooth shaft without a shaft seal is supplied on the drive end to minimize friction and permit user-selected sealing solutions, and the opposite side is delivered without a shaft end to simplify overhung arrangements. Dynamic balance is classified under S1 vibration grade, which works with the motor’s standard bearings to limit structural resonance at rated speed. Electromagnetic behavior follows winding code BS. The compact C length code shortens the package, which is useful when a system already provides external holding functions because the motor is supplied without a holding brake.