Product Description:

The 2AD180C-B35OB1-BS01-D2V1 is an AC induction motor delivered by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It is engineered to convert electrical energy into rotational motion for machine tools, material-handling axes, and other automated assemblies where constant torque and straightforward speed control are required. Its general layout suits installations that rely on inverter-based motor control and need dependable operation during repeated production cycles.

The mechanical core is supported by heavy-duty bearings that sustain radial and axial forces encountered during continuous production. Thermal regulation is handled by an axial blower that draws air along the housing to prevent heat buildup at rated load. Installation versatility comes from flange and foot mounting, which allows the frame to be fastened to either a base plate or a machine wall. Dynamic balance is verified to the R vibration grade, which helps reduce transmitted oscillation to connected structures. Electrical terminations land in a top-mounted terminal box, and the box faces side B so incoming power cabling can be routed from the service corridor behind the drive. There is no shaft extension on side B, while the drive end on side A carries a shaft seal and is balanced with the entire key to help minimize runout during operation.

The motor is supplied without a holding brake, so power-off holding must be provided by the drive or by external machine hardware when the axis is at rest. Dimensional categorization follows the 180 motor size code and the more compact C motor length code, giving the unit a stator stack suited for mid-range kilowatt outputs while staying within common cabinet depths. The BS winding code identifies the winding arrangement used by the motor, allowing a matched inverter to apply the proper voltage and frequency profile during acceleration, steady-state running, and regenerative braking.