Product Description:

The 2AD180C-B35OB1-BS01-B2N1 three-phase induction motor is produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. As an AC induction motor, it converts electrical energy into rotary motion for conveyor sections, packaging stations, and material-handling axes that require controlled speed from a matched drive controller. In variable-speed service, the motor works with the inverter to deliver steady rotation across changing load conditions. Its design suits industrial equipment that runs for long periods and depends on reliable torque delivery during repeated production cycles.

Heat removal is managed by an axial blower that pushes air along the stator to keep winding temperature within its rated range during continuous duty. Installation flexibility is provided through flange and foot mounting, which lets the motor fit either face-mounted or base-mounted machine layouts. This arrangement allows the unit to adapt more easily to existing frames and drive assemblies. Because the motor is supplied without a holding brake, any static load must be secured by external means. Line power enters through a terminal box positioned on the top of the housing, and the conductors exit on side B for organized cable routing. Standard-grade bearings support the rotor, and the shaft is made without a seal while remaining dynamically balanced with a full key to reduce residual vibration.

The motor has length code C and a frame size of 180, which helps set its installation envelope and torque capacity. The frame length also influences the amount of active stator material, which affects continuous output in this motor size. Operating smoothness is associated with vibration grade R, which suits equipment that carries sensitive tooling or requires stable rotation. The motor uses winding code BS, so the connected inverter must supply the corresponding current and voltage characteristics. The non-drive end has no shaft end, which simplifies coupling layouts when only a single drive end is required.