Product Description:

The 2AD180C-B35OA2-BS03/S002 is an AC induction motor manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. In automated machining centers, printing lines, and material-handling axes, it converts electrical power into regulated rotary motion for pumps, spindles, and auxiliary drives. Its three-phase design works with Indramat frequency inverters to provide controlled torque across a broad speed range while keeping maintenance demands low for a squirrel-cage motor. Direct installation in the machine frame can also reduce the need for intermediate transmission components and help maintain accurate mechanical alignment.

Cooling is provided by an axial blower mounted on the housing, which pushes air along the stator to keep winding temperature under control during continuous duty. The frame uses motor size code 180 and motor length code C, giving the motor a larger active iron length and thermal mass suited to mid-range torque service. The motor uses flange and foot mounting, so it can be installed in B35 or V1 orientations without extra adapters. Power conductors terminate in a sealed terminal box on top of the stator, and the Side A cable entry helps keep routing orderly where cabinet and motor positions must stay compact.

Drive communication is handled through high-resolution motor feedback, which supplies precise rotor position data for vector control and removes the need for a separate external encoder. The rotating assembly is balanced to vibration grade S, helping limit radial vibration when the motor is coupled directly to sensitive loads or driven at varying speeds. The electrical and thermal behavior associated with winding code BS allows the matching drive to use the correct current limits and temperature model. Because the motor is supplied without a holding brake, standstill holding must come from drive torque or an external clamp, which is a common arrangement for equipment that runs continuously rather than stopping under a suspended load.