Product Description:

The 2AD180C-B35OA2-BS03-B2N3 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. As a rotating workhorse for machine tools, packaging lines, and material-handling axes, the unit converts electrical energy into mechanical torque that can be regulated by a compatible drive. Its three-phase stator design, combined with slip-controlled rotor currents, delivers continuous motion for industrial automation where precise speed control and high uptime are required.

Cooling is handled by an integrated axial blower, so airflow is directed along the frame to remove heat during sustained loading. Position and speed are supervised through high-resolution motor feedback, allowing closed-loop control down to fine incremental movements. Mechanical installation is simplified because the housing supports flange and foot mounting, giving builders flexibility on horizontal or vertical layouts. The frame follows motor size code 180 with length code C, which corresponds to the stator stack height and overall power density. Mains conductors enter a terminal box that is pre-oriented on the top of the motor, providing a sealed chamber for cable lugs and strain relief while separating power wiring from signal connectors.

The motor is supplied without a holding brake, so static holding torque must be supplied by the external drive or mechanism. Lubricated standard bearings support the rotor and satisfy the dynamic limits associated with machining spindles that require the factory-assigned vibration grade S1. Electrical leads exit toward side A, and the top-mounted box simplifies routing inside cabinets. The opposite end is supplied without a shaft extension, and the working shaft is delivered without a shaft seal but is balanced with the entire key to minimize unbalance forces. The final electromagnetic properties are indicated by winding code BS, which corresponds to the resistance and inductance values used by the matching drive.