Product Description:

The 2AD180C-B35OA1-BS37-D2V1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In automated machinery, it converts electrical energy into rotational motion for conveyors, gantries, and processing spindles that require stable torque during continuous duty. The motor is equipped to work with digital drive controllers so that it can be regulated precisely in closed-loop motion systems used throughout production lines.

Its thermal management is handled by an axial blower that pushes air along the stator, allowing full-load operation without external ducting. Position and speed are returned to the drive by digital feedback with a multi-turn absolute encoder, enabling the controller to track shaft revolutions over multiple turns and resume position after power loss. Flexible installation is supported through flange and foot mounting, so the frame can bolt to a base plate or a machine wall. Stopping torque is provided by an electrically released heavy-duty brake, and the spring-applied design keeps the shaft locked when power is removed. To withstand high radial and axial forces, the rotor runs on heavy-duty bearings, which support demanding applications with belt tension or rapid direction changes.

The frame uses motor size code 180, a diameter class that matches medium-power 2AD drives, while the stack depth uses motor length code C for increased torque over shorter units. Power enters through a terminal box on top of the housing, and the leads exit toward Side A to simplify cabinet wiring. The shaft is sealed, keyed, and supplied without a rear shaft end, allowing coupling only on the drive side. Rotor balance meets vibration grade R, which helps limit oscillation that could affect machining quality. The internal BS winding code matches preset drive parameters used within the series.