Product Description:

The 2AD180C-B35OA1-BS37-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated cells, it converts three-phase electrical power into controlled rotation that a drive regulates for positioning, conveying, or spindle duties. Standard bearings support the rotor under normal radial and axial loads. When paired with a compatible drive, the motor can provide stable speed and controlled torque for repetitive industrial motion in packaging, material handling, and process equipment. This operating role makes it suitable for machines that need steady rotation during continuous-duty production cycles.

Its cooling relies on an integrated axial blower, which forces air through the housing so continuous current can be maintained without thermal derating. An electrically released heavy-duty brake is mounted on the non-drive side; when power is removed, spring force locks the shaft and holds vertical loads until current releases the brake for motion. The motor uses digital feedback with a multiturn absolute encoder, enabling the controller to track rotor position across multiple revolutions after power loss. Frame classification follows size code 180, indicating a stator outside diameter near 180 mm, while length code C is the third stack length in this family and contributes to rated power. Dual flange and foot mounting options allow installation on machine bases or into gearboxes without extra adapters.

The power interface is a terminal box placed on the top of the frame and oriented to Side A, which keeps connection leads short when the motor is positioned with its drive end toward the control cabinet. A smooth shaft without a seal minimizes friction losses at high speed, and the absence of a shaft end on side B reduces overall length for close-coupled pump or fan duties. Dynamic behavior is classified under vibration grade R, which indicates the balance quality used for stable operation across the motor speed range. The stator winding code BS uses a copper gauge and insulation pattern that matches corresponding drive inverters and regional mains voltages.