Product Description:

The 2AD180C-B35OA1-BS03-B2N4 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. This three-phase machine supplies rotational power for conveyors, gantries, and processing equipment in automated lines, where constant torque and straightforward speed regulation are required. By combining a squirrel-cage rotor with forced-air cooling, the motor delivers steady mechanical output while remaining compatible with the variable-frequency drives commonly used in industrial automation and other inverter-fed systems.

Mechanical features start with standard bearings that tolerate continuous radial and axial loading during direct-coupled or belt-driven operation. Forced-air cooling is provided by an Axial Blower, allowing the stator to shed heat even at low shaft speed. The motor is assembled without a holding brake, so stopping energy must be supplied by the drive or external mechanics. Size code 180 identifies the motor frame, and length code C increases the magnetic stack for higher continuous output. Installation flexibility comes from flange and foot mounting, giving machine builders a choice between face or base attachment. Position and speed data are supplied through high-resolution motor feedback, enabling closed-loop control with fine positional accuracy at very low speeds and stable velocity regulation through changing loads.

The power leads enter a sealed terminal box that is mounted on the top of the housing and points toward side A, simplifying cable routing in machines that share a common wiring duct or overhead cable path. Winding identifier BS matches the stator to drives configured for its impedance and thermal profile. The shaft is delivered without a shaft seal and with the key fully balanced to limit vibration during continuous rotation. The rear of the rotor is closed, so there is no shaft end on side B, which helps shorten the total installed length and leaves more room behind the motor.