2AD180C-B35OA1-BS03

Product Description:

The 2AD180C-B35OA1-BS03 drops into the 2AD 3-Phase Induction Motors group from Bosch Rexroth Indramat with no fuss. A frame size of 180 mm sits as its base, and the rated power is marked at 15 kW. That number isn’t as high as some of the big brothers, but it’s definitely solid for regular lift and drive work. 1500 rpm is the listed rated speed, so there’s steady motion for functions that don’t have time for stalls. The torque checks in firm at 226 Nm, which means mechanical loads get the push they need without back-and-forth trouble.

Protection is right up there, handed by the IP65 seal, so factory water spray or dust clouds basically get shut out. The blower system bolted on for cooling keeps this motor relaxed during heavy stretches, labelled as external since it sits separate from the main case. Output on this one is a keyed shaft with standard fit. The mounting style ticks the B35 flange box, which covers both foot and flange for grabbing onto frames. Inside, a digital servo feedback encoder manages the signals for position and speed. It’s set up to run with 400 V, which lines up with standard heavy industrial wiring.

Total weight is listed as approximately 95 kg—not too light, not outrageous, just enough for sturdy installs that won’t shift. Assembly finishes with a bright housing, and everything sticks tight with solid construction, so vibration isn’t a growing problem down the line. The feedback gear makes sure command corrections go right back to the controls. This motor mixes into conveyor lines, machine beds, and mid-sized robotics needing repeatable, clean motion that holds true over the long haul. Not overbuilt and not basic either, the 2AD180C-B35OA1-BS03 marks a spot right in the middle for reliable, day-in-day-out work.