2AD180C-B35LB3-BS13-A2V2

Product Description:

The 2AD180C-B35LB3-BS13-A2V2 lands in the Bosch Rexroth Indramat 2AD 3-Phase Induction Motors lineup and covers a pretty wide industrial ground. With a frame size of 180 and a beefy outside shell, it stands its ground in setups where space matters less than holding power. The rated torque comes in at 143 Nm and the rated speed hits 1500 RPM, which lines up well for steady-duty applications more than fast ones. At 400 V operating voltage, the wiring expects a serious industrial supply, and usually this matches big builds and heavy equipment lines.

Cooling works through external air with the A2V2 configuration, basically pushing airflow over the shell and cooling fins instead of blowing straight through the inside. In places where dirt and dust come with the territory, this approach means less clogging and easier cleaning. The mounting style, B35 flange design, lands the motor right on the frame or on a foot if needed, so swapping in or out doesn’t take strange brackets or custom bits. Speed and position land in check with a BS13 resolver feedback device, giving information for controllers to work with, and stops those little slips that throw timing off.

The overall weight — right around 114 kg — shows how much iron sits inside this motor, not exactly something that slips out for repair without real planning. Expected rated power for this setup typically hovers near 22 kW, a range that fits most material handlers and conveyors. Peaks in torque shoot up to 315 Nm when things get rough for a moment, keeping rollers or presses from stalling when push comes to shove. The finish deals with normal plant wear, and nothing outside stands out as fragile. For environments that never slow down and need reliable muscle, this motor slots into line without second guessing.