Product Description:

The 2AD180C-B35LB1-B513-B2V1 AC induction motor is produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It supplies continuous rotary motion to automated conveyors, material-handling gantries, and packaging mandrels where three-phase mains power is available. The designation "180C" in the code indicates frame size 180 and length variant C. This format helps match the motor's physical envelope and thermal capacity to the intended load profile in production equipment.

Thermal management is handled by an embedded Axial Blower, so the stator can remain within its allowable operating temperature during demanding duty cycles. Position holding during emergency stops is provided by an electrically engaged clamp brake that locks the shaft when energized. Installation flexibility comes from flange and foot mounting, which allows the housing to be secured to machine bases or gearboxes. Rotor position is monitored through high-resolution motor feedback, enabling finely tuned speed regulation in the drive controller. This feedback arrangement supports stable operation during acceleration and deceleration. Power conductors terminate in a terminal box on the left side of the housing, and that same end corresponds to side B in the order code.

Durability is supported by heavy-duty bearings and vibration grade R, which helps keep mechanical oscillation within acceptable limits for precision machinery. Power enters through a connection on side B, while the positional reference "Left" indicates its lateral offset on the housing. The drive shaft is supplied without a rear extension, so torque is delivered only at the primary shaft end. The working end uses a balanced shaft with entire key and without a shaft seal, which reduces seal friction while keeping the shaft suited for higher-speed operation.