2AD164C-B35OC1-BS06-B2V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911296733
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD164C-B35OC1-BS06-B2V1 is a synchronous AC servo motor designed for heavy-duty applications with a maximum torque of 336 Nm. Manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series, it weighs approximately 148 kg and features IM B35 mounting with a protection class of IP65.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD164C-B35OC1-BS06-B2V1 code refers to an Induction motor. This model is manufactured by Bosch Rexroth. The motor is rated to provide a continuous output power of 44 kW. It has a continuous torque capacity of 280 Nm. This motor has a nominal operating speed of 1500 1/min. The rated current at normal load is given as 74 amperes RMS.
The 2AD164C-B35OC1-BS06-B2V1 induction motor has the highest speed of operation may be up to 6000 rpm. The standard operation requires a line voltage of 453 volts RMS. The measured rotor moment of inertia is 0.229 kgm2. It is an F insulation class following DIN VDE 0530. The one-meter noise level is 75 dB (A). The minimum cross-section of the conductor is 25 mm2. It has a net motor mass of 240 kilograms with no type of brake. This 2AD164C-B35OC1-BS06-B2V1 induction motor has a range limitation on operating temperature between 0°C and 45°C ambient. This motor can be used in an installation of up to 1000 meters above the ground. No derating of the performance is required over the given range of altitude. When no shaft seal is fitted IP40 protection rating is the shaft-side rating. The area between connectors and feedback interfaces is covered by IP65 protection.
The 2AD164C-B35OC1-BS06-B2V1 induction motor includes a blower that is axial and provides forced ventilation cooling. The direction of the airflow in a blower is from side B to side A. The blower can be used in a flexible manner with dual voltage. The average rate of blower airflow is 1120 cubic meters per hour. The insulation system also enables the motor to endure thermal stress effectively. This servo motor has a thermal response time rating of 65 minutes.
Frequently Asked Questions about 2AD164C-B35OC1-BS06-B2V1:
Q: Why is the 2AD164C-B35OC1-BS06-B2V1 Induction Motor rated for 44 kW continuous power?
A: The 2AD164C-B35OC1-BS06-B2V1 Induction Motor is rated for 44 kW continuous power to ensure reliable operation in industrial settings requiring high power output. This capability supports demanding applications without performance degradation.
Q: How does the rotor moment of inertia affect the 2AD164C-B35OC1-BS06-B2V1 Induction Motor’s performance?
A: The 2AD164C-B35OC1-BS06-B2V1 Induction Motor has a rotor moment of inertia of 0.229 kg·m², enabling efficient response to load changes. This ensures better stability during acceleration and deceleration in high-torque operations.
Q: What benefits does the IP65 protection offer for the 2AD164C-B35OC1-BS06-B2V1 Induction Motor?
A: The 2AD164C-B35OC1-BS06-B2V1 Induction Motor has IP65 protection for areas between connectors and feedback interfaces. This ensures the motor is dust-tight and resistant to water jets, improving durability in harsh environments.
Q: Why is the thermal response time important for the 2AD164C-B35OC1-BS06-B2V1 Induction Motor?
A: The 2AD164C-B35OC1-BS06-B2V1 Induction Motor has a thermal response time of 65 minutes, allowing it to handle thermal stresses effectively. This prevents overheating and ensures the motor operates optimally in varied temperature conditions.
Q: How does the axial blower improve the 2AD164C-B35OC1-BS06-B2V1 Induction Motor's cooling system?
A: The 2AD164C-B35OC1-BS06-B2V1 Induction Motor uses an axial blower to provide forced ventilation, with an airflow rate of 1120 cubic meters per hour. This cooling system supports consistent motor performance by preventing excessive heat buildup during operation.
