Product Description:

The 2AD164C-B35OB6-BS06-B2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It supplies electromechanical power for automated machinery by converting three-phase current into rotary motion for conveyors, packaging modules, and material-handling axes. When paired with a frequency converter, the unit delivers controllable speed and torque that support precise process timing and consistent throughput. Its operating concept suits machines that need repeatable rotation over long production runs without relying on a separate servo motor platform.

Its primary cooling path uses a radial blower that forces air along the frame, and an axial blower rated at 400 V removes heat from the non-drive end. Position data is transmitted through digital servo feedback, allowing the inverter to regulate speed and rotor angle during changing load conditions. The motor has a frame size of 164, and the C length provides additional thermal capacity for continuous-duty operation. The motor uses flange and foot mounting, so it can be installed on a base or attached directly to a machine face. The shaft is balanced with an entire key, and the unit is delivered without a holding brake, so external holding force is required at standstill. Winding code BS identifies the electrical values used with compatible 2AD drive systems.

Heavy-duty bearings support high radial and axial loads, while the R vibration grade allows use on machines with moderate imbalance. Power cabling enters through a plug connector mounted at the top of the housing and directed toward side B, which helps when cable space above the motor is available. The shaft is supplied without a shaft seal, so the motor is better suited to installations where oil mist or coolant is not directed at the shaft journal. A blank rear shaft end leaves no provision for a secondary mechanical takeoff, and the brake-free layout reduces rotating inertia during speed changes.