Product Description:

The 2AD164C-B35OB1-BS06-H2N2 is an AC induction motor from Bosch Rexroth Indramat’s 2AD 3-Phase Induction Motors series. Designed as a prime mover for machine tools, transfer lines, and material-handling axes, the unit converts three-phase electrical input into continuous mechanical rotation within automated production cells. Its architecture supports forced cooling and encoder feedback, allowing it to operate as part of closed-loop drive packages in harsh industrial environments.

The motor relies on an axial blower that channels air along the stator; the fan is powered by a dedicated 400 V circuit so thermal performance is independent of shaft speed. Position data is returned through digital servo feedback, enabling the inverter to regulate flux and torque with high resolution. A frame that matches size code 164 yields the required magnetic cross-section without exceeding common footprint limits. Installation is flexible thanks to flange and foot mounting, which lets the housing be bolted either to a machine base or an adapter plate. Length code C keeps the package moderately deep, standard bearings carry continuous radial loads, and the design is supplied without a holding brake to minimize inertial mass.

Electrical hookup is simplified by the connector orientation to side B, where the leads exit on the top of the stator. The mains and blower conductors terminate in a keyed power plug, reducing wiring time during service. Winding code BS identifies coils optimized for inverter duty, and the motor meets vibration grade S, limiting displacement that could affect precision tooling. Rotational components are balanced with a half key, and a protected shaft seal prevents oil or coolant from reaching the bearing set. Absence of a rear shaft end leaves space for the blower housing, while the top exit keeps cables clear of floor-level equipment.

View Datasheet