2AD164C-B05OB1-BS06-C2N1

Product Description:

The 2AD164C-B05OB1-BS06-C2N1 is an asynchronous Bosch Rexroth servo motor. All 2AD motor units feature fixed blowers for forced ventilation. Operators can order axial or radial blowers that produce different median air volumes. The main purpose of the blower is to increase airflow across the motor housing. This increases the rate of heat dissipation and reduces the ambient temperature, which leads to lower internal motor temperatures. Lower internal temperatures are more conducive to component performance, and allow the motor to reliably deliver rated output under higher load conditions. 2AD164C-B05OB1-BS06-C2N1 is a motor with an axial blower rated for 400 to 460 Volts AC. Its power draw is 220 VA. Air flow production of the blower is 1120 cubic meters per hour. Operators can select either a power plug or a terminal box for the power connection.

The output direction of the power connection must be selected at the time of motor ordering. The 2AD164C-B05OB1-BS06-C2N1 motor has a power plug located at the top and pointed towards side B. The motor has a plain shaft with seal. Protection class of the motor is IP65. Protection class of the blower is IP24. Technical data for the motor includes 1830 RPM nominal speed, 46 kW output power, and 240 Nm output torque. The motor power cable must have significant dimensions that allow it to safety carry electrical power for the motor. Bosch recommends 25 mm2 as the minimum size of the motor power cable. Optimal performance requires ambient temperatures ranging from 0 to 40 ⁰C. 2AD motors undergo inspections and rigorous testing at the factory. Therefore, operators do not need to run tests on these motors. However, the motor must be inspected at delivery for any damage caused during storage and transport.