2AD164B-B35OB1-DS06-D2V1

Product Description:

The 2AD180C-B35LB3-BS03-C3N1 motor comes from Bosch Rexroth Indramat and slots into the 2AD 3-Phase Induction Motors collection, standing out with a frame size of 180 mm and a tight build meant for bigger automation equipment or heavy use. This design has a synchronous AC motor principle and turns out a rated power of 35 kW, with enough depth in its frame to tackle steady loads or regular high-speed cycling. Top speed can reach 3000 rpm, and when there’s a need for extra push, the motor can put down 110 Nm of rated torque, which helps heavy motion gear keep up pace without much drop-off.

For electrical integration, the cable box is set up in the C3N1 arrangement. Connections come out simple, and sensors are tucked inside, so temperature checks happen on the fly—one less thing to set up separately on install. Any system with movement demands or where underwater washdowns aren’t rare gets help from the IP65 enclosure rating, which combines all-round dust blockage with protection against pressurized spray-downs. Cooling is organized using a blower (type B) that feeds airflow as needed to handle heat buildup and avoid overloads when operation stays nonstop for long cycles. The mounting plan is IM B35, allowing for both flange and foot mount, so rigging the motor to new or older lines doesn’t ask for aftermarket adjustments.

Feedback stays on point because the BS03 resolver is in place for direct, signal-stable control that is important in automated lines where drift is not acceptable. Torque and temperature performance both stay inside the safe zone because a thermal sensor is added right at the start. The surface and case are ready for use in industrial automation thanks to robust finish and elements that keep dirt or liquid problems low.