Product Description:

The 2AD164B-B35OB1-DS06-B2N1 is a three-phase induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. The unit converts electrical power into mechanical rotation so that automated transfer lines, material-handling stations, and machining cells can maintain continuous torque under inverter control. Its integrated blower and feedback interfaces allow the motor to operate as a coordinated axis inside multi-drive assemblies where speed regulation, position tracking, and duty-cycle endurance must match factory throughput requirements.

Forced ventilation is supplied by a 400 V axial blower, which pushes cooling air through the stator to keep winding temperature below design limits during continuous duty. Position and velocity are returned to the drive by the built-in digital servo feedback, enabling closed-loop control without external sensors. Mechanical integration is simplified by flange and foot mounting, letting the frame bolt either to a base plate or a gearbox housing. The frame-size code 164 corresponds to the motor's stator diameter and allowable shaft-load range. Electrical power is routed through a power plug that sits on the blower housing; the plug faces Side B and is accessed from the top of the motor, which keeps cables away from the machine bed.

The rotor runs on standard bearings, and the housing uses length code B. The shaft on Side B is closed because the design is supplied without a shaft end, while the drive shaft on Side A is balanced with its full key and is not fitted with a shaft seal. The motor is delivered without a holding brake, so stopping torque must come from the drive or an external brake. Dynamic behavior conforms to vibration grade R, and winding code DS identifies the electrical characteristics used with compatible inverters in this series.