2AD164B-B05OB1-BS07-C2N1

Product Description:

2AD164B-B05OB1-BS07-C2N1 is a Bosch servo motor. It is especially designed for industrial automation systems that require closed-loop control. This type of control, also known as feedback control, continuously monitors the output of the system and compares it to the desired output (called the setpoint). Based on the difference between the two, the control system makes adjustments automatically to minimize any difference or error. A multiturn absolute encoder is installed on this motor for feedback. Multiturn absolute encoders provide the absolute position of a shaft within one full rotation and keep track of the number of complete rotations the shaft has made. This is one of the feedback options that are available for 2AD motors, and operators can select other options to match their application requirements. Critical performance data for this motor include 180 Nm rated torque and 37.7 kilowatts power output.

Ratings for nominal and peak speeds are 2000 RPM and 6000 RPM. All servo motors require power cables with adequate cross-sections. This is important because thin power cables have higher resistance and lower current carrying capacity, and can cause serious performance and safety issues. For this reason, Bosch has specifically specified the minimum wire size for each of its motors. For this motor, the power cable cross-section must be more than or equal to 25 mm2. Specifications for shafts on 2AD motors are also selectable. This motor has a plain shaft with sealing ring. The axial blower mounted on the 2AD164B-B05OB1-BS07-C2N1 motor has voltage requirement of 460 Volts and its protection class is IP24. This flange-mounted servo motor weights 206 kilograms. The noise level it produces during operation is 75 dB(A).