Product Description:

The 2AD160C-B35RR3-BS06-D2V1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As an asynchronous drive source, it converts electrical energy into rotational motion for conveying, forming, and handling stations that require continuous torque without complex commutation. The design fits industrial automation systems in which drive controllers issue commands and closed-loop regulation maintains speed and torque under variable load. Its mechanical envelope suits common multi-axis machines, and the motor can be used where steady operation and durable mechanical integration are required.

The motor is built with heavy-duty bearings that tolerate radial and axial loads encountered in belt drives and gearheads. A radial blower mounted on the housing forces cooling air across the stator so rated thermal limits are maintained during continuous duty. Position and velocity information returns to the drive through digital servo feedback, enabling slip compensation and precise speed trim during changing process conditions. Installation flexibility is added with flange and foot mounting, so the frame can be fixed to a base plate or front face without adapters. Power conductors enter from the housing side that faces the right side, which can simplify cable routing when the shaft projects forward. The unit is supplied without a holding brake, so load retention during power-off conditions must be provided by drive torque or an external mechanical device.

The frame is classified under size code 160, and its axial proportion is set by length code C, giving a balanced ratio between torque output and overall mass. Incoming mains lines terminate inside a terminal box, allowing rigid conduit or cable gland fittings to be attached in the field. The drive side uses a keyed shaft with a shaft seal, while the opposite face is made without a second shaft extension to avoid unnecessary overhang mass. Dynamic behavior is set by vibration grade R, and the electromagnetic profile is set by winding code BS for general-purpose machinery.