Product Description:

The 2AD160C-B35RB2-BS05-B2N2 is an AC induction motor produced by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into continuous rotary motion for conveyors, pumps, and other automated plant equipment that rely on asynchronous drive technology. In automation systems, it serves as the main drive element where steady torque and reliable speed control are required over long operating periods. Its frame and electrical interface follow established 2AD dimensional codes, supporting installation in machine layouts that use this motor platform.

This model uses frame size code 160 and length code C, which correspond to the stator stack height and overall housing depth. Cooling is handled by an integral axial blower that forces air over the windings to sustain rated temperatures during steady-state loading. Forced airflow supports thermal stability when shaft-driven ventilation alone would not be sufficient. The motor is supplied without a holding brake, so any load-holding duty must be provided by downstream mechanics or drive torque. For installation, the housing supports flange and foot mounting, which allows either face mounting to a gearbox or bolting to a baseplate. Standard-grade bearings manage radial and axial forces, while the shaft is factory balanced with its full key in place to help limit transmitted vibration.

The power conductors enter through a terminal box fixed on the right side of the end shield, and the outlet is oriented toward side B to keep wiring clear of the driven shaft and cooling airflow. This arrangement helps separate the cable path from the primary mechanical output area. Stator winding code BS corresponds to the copper gauge, insulation, and thermal sensor arrangement used with compatible Bosch Rexroth drives for accurate current and temperature control. The rotor has no shaft extension on the opposite end, and there is no shaft seal, so external sealing can be handled by the driven machine. Vibration grade S limits residual imbalance so connected equipment can remain within standard industrial vibration levels.