2AD160C-B35OB2-BS03-E2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285273
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The 2AD160C-B35OB2-BS03-E2N1 motor boasts a frame size of 160, blower-cooled functionality, IP65 protection, and an axial terminal box with cable glands. Part of the 2AD 3-Phase Induction Motors series by Bosch Rexroth Indramat, it delivers a nominal speed of 1500 RPM and supports a nominal voltage range of 380 to 480 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat’s 2AD160C-B35OB2-BS03-E2N1 unit within the 2AD series offers a frame size “160.” This larger frame provides a broader magnetic circuit that raises torque capacity for heavy industrial loads. Its length “C” denotes an extended rotor and stator stack which increases thermal mass and makes the winding operate longer at rated load without thermal trip. “B” shows blower cooling and indicates an axial forced-air system to move air over the housing and reduce winding temperature. The motor’s mounting type “B35” combines flange and foot features, allowing direct machine coupling and flexible foundation options for varied installation layouts.
Its feedback code “BS03” identifies a resolver which supplies high resolution rotor position data. “E2” connection code refers to an axial terminal box with cable glands for simplifying cable entry and protects terminals from mechanical strain. Protection rating of IP65 signals complete dust exclusion and protection against water sprays. Its nominal voltage 380V to 480V enables operation across standard 3-phase supply ranges for broad regional compatibility. The drive’s nominal speed of 1500 RPM corresponds to synchronous design intent and matches standard pump speed requirements. The rated power varies by configuration and typically reaches up to 22 kW for this device’s frame and length.
The part number 2AD160C-B35OB2-BS03-E2N1 also associates with standard bearings which support radial and axial loads. Its ambient temperature range is commonly specified at 0 to 45 degrees Celsius which limits thermal stress and sets an operating envelope for enclosure and cooling choices. This device with a maximum speed rating up to 6000 min-1 identifies safe overspeed limits for transient conditions and system design. Alos, its blower connection uses an axial blower and a terminal box with cable screw joint which secures the blower feed and eases service access.
Frequently Asked Questions about 2AD160C-B35OB2-BS03-E2N1:
Q: How does the BS03 feedback affect control for 2AD160C-B35OB2-BS03-E2N1?
A: This feedback BS03 denotes a resolver which provides rotor angle and speed data. The resolver output supports high resolution position sensing and improves closed loop stability for motion control tasks.
Q: What does the E2 terminal configuration mean for the 2AD160C-B35OB2-BS03-E2N1?
A: The connection E2 in this type code indicates an axial terminal box with cable glands which centralizes power entry and secures cable terminations.
Q: How is the IP65 rating applied to the 2AD160C-B35OB2-BS03-E2N1?
A: IP65 protection class confirms dust tight enclosure and resistance to low pressure water jets. This IP rating allows operation in dusty environments and spray conditions without ingress related failures.
Q: What nominal voltage range does the 2AD160C-B35OB2-BS03-E2N1 use?
A: The motor variant specifies 380 to 480 V nominal voltage which matches common three phase industrial supplies. This voltage range enables regional compatibility and ensures correct magnetics at rated conditions.
Q: Why is the nominal speed listed for the 2AD160C-B35OB2-BS03-E2N1?
A: This nominal speed of 1500 RPM defines the drive’s rated synchronous or design speed which aligns with gear and pump selection.
