2AD160C-B35OB2-BS03-C2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254467
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD160C-B35OB2-BS03-C2N1 motor comes with a 2AD motor series, an output power of approximately 22 kW, a rated speed of 1500 rpm, and an external radial blower cooling type. Part of the 2AD 3-Phase Induction Motors manufactured by Bosch Rexroth Indramat, it features IP65 protection and weighs around 155 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD160C-B35OB2-BS03-C2N1 Induction motor is developed by Bosch. It is part of the 2AD family with a frame size of 160 and a C length. The construction design follows the B35 format. It allows flange and foot installation. The drive end includes a plain shaft sealed with a protective ring for durability.
The opposite shaft extension is not present in this 2AD160C-B35OB2-BS03-C2N1 induction motor configuration. The vibration classification is R, which corresponds to the defined standard level. The rated output capacity of the 2AD motor is 37 kW. The continuous torque is specified at 191 Nm under nominal conditions. The defined operating speed of the motor is 1500 revolutions per minute. The current demand is 90 A (rms) at rated performance. The system is designed to operate at a 209 V (rms) supply voltage. The rotor of the 2AD160C-B35OB2-BS03-C2N1 induction motor has a moment of inertia of 0.174 kg·m² to support controlled acceleration behavior. The maximum attainable rotational speed is 6000 rev/min. The thermal time duration is set at 60 minutes for balanced heat dissipation. The winding insulation is rated under class F for endurance. The surrounding temperature range for proper use is 0 to 45 °C. The air cooling is achieved through an axial fan directing flow from side A to B. The ventilation unit accepts either 3 × AC 400 V at the frequency of 50/60 Hz.
The noise emissions average of the 2AD160C-B35OB2-BS03-C2N1 induction motor 75 ± 3 dB(A) at 1m of distance. The acoustic measurement is taken at a 4 kHz pulse width modulation frequency. This allows controlled sound levels in operating environments. The total mass of the motor assembly is 240 kg. Position detection is provided by a high-resolution feedback unit type 3. This motor is designed for consistent industrial automation applications.
Frequently Asked Questions about 2AD160C-B35OB2-BS03-C2N1:
Q: What is the significance of the B35 construction on 2AD160C-B35OB2-BS03-CS03 induction motor?
A: The B35 construction design allows for combined flange (IM B5) and foot (IM 1001) mounting. This provides flexible mechanical integration into diverse industrial machinery and automation systems.
Q: Why does the 2AD160C-B35OB2-BS03-C2N1 motor use a plain shaft design?
A: The plain shaft with a protective ring seal enhances durability by preventing contaminant ingress. This design is suited for direct coupling applications requiring high misalignment tolerance.
Q: How does the R vibration classification affect 2AD160C-B35OB2-BS03-C2N1 installation?
A: Vibration classification R indicates a standard vibration severity level for industrial motors. This simplifies mounting as it does not require special vibration-damping foundations for most applications.
Q: What is the implication of the 0.174 kg·m² rotor inertia for 2AD160C-B35OB2-BS03-C2N1?
A: The rotor's moment of inertia directly influences the motor's acceleration and deceleration dynamics. A value of 0.174 kg·m² supports controlled starts and stops under high load conditions.
Q: How does the 60-minute thermal time constant protect the 2AD160C-B35OB2-BS03-C2N1?
A: This thermal time constant defines the motor's ability to withstand overload conditions before overheating. It allows for temporary peak loads without immediate tripping of protective devices.
