2AD160C-B35OB2-BS01-A2V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911247227
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD160C-B35OB2-BS01-A2V1 is an asynchronous motor with a frame size of 160 and a B35 mounting type. Manufactured by Bosch Rexroth Indramat, this motor is part of the 2AD 3-Phase Induction Motors series and operates at 400/460V with a frequency of 50/60 Hz. It features IP54 protection and air cooling with an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth’s servo motor 2AD160C-B35OB2-BS01-A2V1 is designed for a nominal torque delivery of 236 Nm and it functions on a 3 x 299 V AC source. It uses an axial blower cooling with suction mode that pushes air from side A to side B through the housing and it is permanently mounted on the B side of the unit, while the unit’s noise emission level is 75±3 dB(A).
The 2AD160C-B35OB2-BS01-A2V1 motor is equipped with heavy-duty bearings designed for high loads and its vibration severity is defined as class R for stable operation during continuous duty with a vibration limit of 1.8 mm/s up to 3600 rev/min of angular speed. Its peak speeding capability is 6000 rev/min and it uses 37000 W of power along with 90.0 A of current in normal load conditions. The unit comes with B35 construction that allows feet/flanges both styles of mounting and its flange diameter is approx. 30.0 cm. Its shaft supports a one-side assembly attachment and it measures 110 mm in length, while it is designed in a plain configuration without seal. This 2AD motor operates at a normal continuous speed of 1500 rev/min and its rotor inertia is measured as 2290 kg·cm².
The 2AD160C-B35OB2-BS01-A2V1 motor’s permissible ambient temperature range is 32 - 113 °F and its insulation system is built to class F standard. Its inbuilt thermal safety protects against overheating and triggers a fault signal to the connected drive unit if the winding temperature exceeds 311 °F. This 2AD motor measures 784 mm in length and its power cable entry is PG42 with a minimum cable thickness of 35 mm² that connects to the top located junction point for electrical power termination.
Frequently Asked Questions about 2AD160C-B35OB2-BS01-A2V1:
Q: How does the axial blower cooling system improve performance?
A: The axial blower aids heat dissipation by pulling fresh air through the housing, enhancing thermal management. This allows the 2AD160C-B35OB2-BS01-A2V1 to maintain optimal performance under continuous load.
Q: Why is class R vibration severity significant for this motor?
A: Its class R ensures low vibration amplitudes, minimizing wear on internal components and external mountings. This contributes to the motor’s longevity and smooth operation near peak speeds up to 6000 rpm.
Q: What advantage do heavy-duty bearings bring to the 2AD160C-B35OB2-BS01-A2V1?
A: The heavy-duty bearings support higher radial and axial loads, enhancing reliability under strenuous conditions. They help preserve low vibration and long-term service life, especially in continuous operations.
Q: How does rotor inertia impact motor performance for 2AD160C-B35OB2-BS01-A2V1?
A: The rotor inertia of 0.229 kg·m² balances stability and responsiveness, smoothing speed changes while avoiding sluggish control. It’s especially useful in applications requiring precise motion control.
Q: Why is the one-side plain shaft configuration used in this servo motor?
A: A one-side plain shaft simplifies coupling and maintenance tasks, reducing assembly complexity. It also allows flexibility in mounting accessories without compromising shaft strength.
