2AD160C-B35OB1-BS06-D2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911278108
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD160C-B35OB1-BS06-D2N1 servo motor features a frame size of 160 mm, a B35 flange design, a cooling method of blower cooled, and a rated torque of 38 Nm. Part of the 2AD 3-Phase Induction Motors from Bosch Rexroth Indramat, it offers IP65 protection and operates at a rated speed of 1500 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD160C-B35OB1-BS06-D2N1 is a high-speed servo motor. It can operate continuously at 1500 RPM. When required, its speed can increase to a rated maximum of 6000 RPM. The windings used on the motor have a special design that allows continuous operation under heavy loads. These low-resistance windings enable nominal output of 37 kilowatts power and 236 Nm torque. Current rating of the 2AD160C-B35OB1-BS06-D2N1 motor is 90 Amps and its rated voltage is 299 Volts. Thermal time constant for this Bosch 2AD motor is 65 minutes. 2AD motors run on AC power delivered by a servo drive. The power cable used for this purpose must be sized properly to prevent safety and reliability issues. For this motor the minimum cable cross-section allowed by Bosch is 35 mm2. Standard motor bearings provide a 20,000 hour mechanical operating life.
To ensure that the bearings don’t wear out due to lubricant overconsumption, operators must ensure operating conditions match those specified by the manufacturer. Critical operating conditions include ambient temperature, average motor speed, and shaft loads. If the operating conditions are within specified limits, the lubricant will last longer than the operating life of motor bearings. The converse is also true, and operators and staff must refer to the product manual and follow instructions to prevent motor malfunction due to bearing wear. Bosch has installed an axial blower on this motor to improve airflow and increase the rate of heat dissipation. Power-related specifications for the blower are 220 Volts input and 220 VA power draw. The main motor shaft has a key and a sealing ring, giving it IP65 level protection. Connections for power and feedback are also IP65 rated.
Frequently Asked Questions about 2AD160C-B35OB1-BS06-D2N1:
Q: Which bearings are used on the motor?
A: Standard bearings are used on the motor.
Q: What is the motor insulation class?
A: Insulation class of the motor is F.
Q: What is the power requirement of the fan?
A: The fan requires 400/460 Volts AC power.
Q: What is the motor flange size?
A: The motor flange size is 316 millimeters.
Q: What is the size of the motor power cable?
A: Bosch recommends power cables with 35 mm2 cross-sectional area.
