2AD160C-B35OB1-BS06-A2N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277867
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD160C-B35OB1-BS06-A2N1 is an AC servo motor with surface cooling and a frame size of 160 mm. Designed by Bosch Rexroth Indramat as part of their 2AD 3-Phase Induction Motors, it features B35 flange and foot mounting and operates at up to 3000 rpm. It includes a holding brake and IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD160C-B35OB1-BS06-A2N1 is a high-power AC motor. It has a design with low resistance windings that allow it to consistently deliver 37 kilowatts of output power. The high-torque motor has a rated output torque of 236 Nm. With a 1500 RPM nominal speed and 6000 RPM peak speed, it can satisfy motion control requirements for industrial applications in manufacturing and other sectors. The motor is connected with a servo drive during operation. The drive delivers AC power to the motor through a dedicated power cable. The recommended cable size for this motor is at least 35 mm2. The drive controls the motor by varying the amplitude and frequency of the power supply it delivers to the motor. The amplitude and frequency of the controller AC output are determined by control algorithms that take into consideration the desired values for motor speed and torque and real-time feedback the controller receives from the motor.
Bosch has equipped the 2AD160C-B35OB1-BS06-A2N1 motor with high-resolution feedback. Higher resolutions allow for higher accuracy by minimizing the error between analog feedback values and their digital representations. Nominal current for the motor is 90 Amps and the nominal voltage is 299 Volts. Bosch 2AD motors feature axial or radial blowers for cooling. This motor comes with an axial blower. This blower has a voltage rating of 400 to 460 Volts and its power consumption is 220 VA. Use of the blower helps to keep the ambient temperature within the desired range of 0 to 45 ⁰C. Bosch 2AD motors require 0 to 1000 meters site elevation to deliver rated output. To ease installation, the motor supports two methods, which are flange and foot mounting.
Frequently Asked Questions about 2AD160C-B35OB1-BS06-A2N1:
Q: What is the motor shaft design?
A: The motor has a smooth shaft.
Q: Is a holding brake installed on the motor?
A: The motor does not feature a holding brake.
Q: Which bearings are used on the motor?
A: Standard bearings are used on the motor.
Q: What is the motor mass?
A: The motor mass is 240 kilograms.
Q: What is the peak motor speed?
A: The peak motor speed is 6000 RPM.
