2AD160C-B35OB1-BS03/S013
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911232698
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD160C-B35OB1-BS03/S013 motor features an axial blower cooling type, a maximum speed of 9000 rpm, IP65 protection, and a rotor moment of inertia of 0.027 kg·m². Designed as part of the 2AD 3-Phase Induction Motors by Bosch Rexroth Indramat, it offers flange and foot mounting with a motor mass of 60 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD160C-B35OB1-BS03/S013 Induction Motor is produced by the Bosch Rexroth Indramat. This motor is designed for accurate speed control in various industrial automation applications. It provides a continuous torque output of 236 Nm. The motor has a nominal rating of 37 kW. Its operating speed is 1500 min⁻¹ under standard conditions.
The 2AD160C-B35OB1-BS03/S013 induction motor operates with an input voltage of 299 Veff and an input current of 90 Aeff. This unit is capable of achieving a top rotational speed of 6000 rpm. Its insulation design is rated as Class F in compliance with DIN VDE 0530 Part 1 for resistance to elevated operating temperatures. In terms of vibration performance, the servo motor is classified under the R, S, and S1 groups defined by DIN ISO 2373. The thermal response characteristic for heating is given by a time constant of 65 minutes. Its winding type is identified with the BS designation. The frame of the motor corresponds to the size C configuration. The 2AD160C-B35OB1-BS03/S013 induction motor weighs 240 kilograms with the blower included but without the brake fitted. The power cable must have a conductor cross-section of not less than 35 mm². At a distance of one meter, the motor produces an average noise level of 75 dB(A) ±3 measured at a pulse width modulation frequency of 4 kHz.
The torque and power values of the 2AD160C-B35OB1-BS03/S013 induction motor remain within the specified limits during duty. The allowable operating temperature ranges between 0 and 45 °C. The induction motor maintains accurate control across its full speed range. The motor inertia value without the brake equipment is 0.229 kgm². The electrical and mechanical properties guarantee steady performance in continuous operation. The structural design supports minimized vibration and extended functional life. These combined specifications support demanding requirements in automated systems.
Frequently Asked Questions about 2AD160C-B35OB1-BS03/S013:
Q: How does torque stability affect automation precision?
A: The torque stability ensures consistent drive response during variable loads, minimizing positional deviation. The uniform torque delivery enhances synchronization across interconnected motion axes.
Q: What factors influence the motor’s thermal efficiency?
A: The thermal efficiency depends on insulation class F and optimized winding design, limiting internal losses. The controlled heat dissipation prolongs component life under continuous operation.
Q: How does speed variation impact mechanical integrity?
A: The motor’s rated and maximum speed ratio maintains safe rotor balance across 1500–6000 min⁻¹. The balanced dynamics prevent mechanical resonance during frequent acceleration cycles.
Q: What integration conditions affect electrical connection quality?
A: The electrical connection quality relies on a minimum 35 mm² cable cross-section and correct terminal alignment. The proper conductor sizing reduces voltage drops and thermal buildup.
Q: How does vibration rating influence installation alignment?
A: The vibration rating under DIN ISO 2373 ensures predictable shaft stability within categories R, S, and S1. The defined limits support accurate coupling with precision gear systems.
