Product Description:

The 2AD160C-B35OB1-BS03-D2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. Designed for continuous operation on factory mains, the unit delivers rotary motion to conveyors, pumps, and presses where constant-speed performance and high starting torque are required. Its three-phase stator draws line power from a matched drive controller, and the squirrel-cage rotor provides smooth, brush-free output for automated material-handling and machining systems.

The motor uses heavy-duty bearings, so radial and axial loads from belt tension or gear thrust remain within permissible limits throughout service life. An integrated axial blower directs forced air along the frame to remove heat and protect winding insulation. Closed-loop control is supported by built-in high-resolution motor feedback, which allows precise velocity trimming during ramp-up and load changes. With frame size 160, the motor has a stator diameter suited to this housing class. The motor uses flange and foot mounting, allowing either face mounting to a gearbox or base mounting to a skid. The power entry sits on top of the housing and exits toward side B to keep cable routing clear of the drive end. No shaft end is provided on side B, and the motor is supplied without a holding brake, so the load must be secured by external hardware when power is removed.

The length designation C indicates a medium active stack that balances torque output with compact overall depth. Power conductors terminate inside a terminal box, providing shielded, screw-clamp connections. Dynamic balance is held to vibration grade R, which helps limit residual shaft oscillation that could affect precision tooling. Winding code BS matches the copper configuration used with compatible 2AD drives for proper current density and temperature rise. A shaft seal and a key balanced with the complete rotor assembly also help reduce mechanical runout.