2AD160C-B35OB1-BS03-A2N3
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911262539
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 2AD160C-B35OB1-BS03-A2N3 is a flange-mounted, blower-cooled induction motor with a keyed output shaft and shaft sealing ring. Built by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series, it delivers a rated power of 20 kW and a torque of 128 Nm. The motor weighs approximately 95 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD160C-B35OB1-BS03-A2N3's braking system is built to work well and needs a control voltage of 24 VDC ± 10% (Volts of Alternate Current). An undervoltage detection system should be used to keep an eye on the power supply to make sure that braking performance is the same, particularly when the load is at its worst. This step helps make sure that the brakes will work safely and reliably in all situations. It was designed for tough industrial uses. It weighs around 95 kilograms, which makes it a good choice for jobs that need both stability and a lot of power. It has a rated current of 75.5 A and a standstill continuous current of 81.7 A, which shows that it can take big loads and keep working well even while it's running all the time.
The 2AD160C-B35OB1-BS03-A2N3 is perfect for places where dependability, efficiency, and durability are very important. Users should be aware of the temperature and altitude of the installation when it comes to environmental functioning. If any parameter goes over the nominal values, estimated utilization factors must be used to change the motor's performance data to keep it safe and avoid overloading.
When the ambient temperature and setup height are both higher than normal, the application must take into account the combined impact of these two parameters. The application must not exceed the decreased motor data that results from this. This method makes sure that the motor keeps working safely and well, even when things become tough. Vertical installation needs extra care since this position might make it easier for dirt or fluids to get into the motor, which could cause it to break down or stop working. To lower these dangers, the right sealing and environmental protection steps should be taken.
Frequently Asked Questions about 2AD160C-B35OB1-BS03-A2N3:
Q: What is the frame size of the 2AD160C-B35OB1-BS03-A2N3 motor?
A: The frame size for this motor is "160," which determines its physical dimensions and compatibility with mounting systems.
Q: What does the motor length "C" indicate?
A: The "C" in the model number refers to the specific length of the motor, affecting its overall power and performance characteristics.
Q: What type of cooling does the 2AD160C-B35OB1-BS03-A2N3 motor use?
A: This motor uses surface cooling with a blower (blower-cooled), which helps maintain optimal operating temperatures during continuous use.
Q: What is the mounting design of this motor?
A: The 2AD160C-B35OB1-BS03-A2N3 features a flange mount (B35), making it suitable for applications requiring secure and precise mounting.
Q: What type of output shaft does this motor have?
A: This model is equipped with a keyed shaft and a shaft sealing ring, providing reliable mechanical connection and enhanced protection against contaminants.
