2AD160C-B35OA1-DD06-D2N3

Product Description:

The 2AD160C-B35OA1-DD06-D2N3 is an advanced 2AD Rexroth motor designed and manufactured for dynamic automation systems requiring high driving torques. Equipped with a built-in motor feedback encoder, this servo machine can be used alongside other electrical modules and devices such as servo drives for precise applications. During operation, this 2AD motor relies on the servo drive to draw power and prevent fault conditions. Although some servo motors incorporate a thermal sensor to monitor the winding temperature during operation, protection features for fault conditions such as short-circuit and overcurrent are typically integrated in the servo drive.

As an asynchronous three-phase servo machine, the 2AD160C-B35OA1-DD06-D2N3 requires a nominal input voltage of 316 V. At this nameplate voltage, the motor can safely deliver a nominal torque of 220 Nm at a consistent shaft speed of 2000 rpm. Whenever the drive circuit is adjusted, the shaft velocity, torque, or power can be adjusted accordingly. Considering its winding and mechanical bearing type, this servo motor can achieve a peak speed of 6000 rpm. Like other 2AD motors by Rexroth Indramat Bosch, this machine requires a minimum power wire cross section of 35 square millimeters. At most, this motor can accommodate a continuous RMS current of 109 A during nameplate conditions.

Although the 2AD160C-B35OA1-DD06-D2N3 does not come with a built-in holding brake, it does come with digital servo feedback for closed-loop control of the shaft position or speed during operation. With its type-D output shaft, this servo motor incorporates a full keyway with a sealing ring. Like other servo motors manufactured by Rexroth under the 2AD series, this machine employs standard mechanical bearings. Wake Industrial provides a motor warranty for this product, valid for up to one year.