2AD160C-B35OA1-BS11-A2N1

Product Description:

The 2AD160C-B35OA1-BS11-A2N1 motor is a member of the Bosch Rexroth Indramat 2AD 3-Phase Induction Motors line. With its frame size of 160 and shaft height set at 160 mm, there’s enough room for this motor in most mid-to-large automation machines. The type here is asynchronous, and a big chunk of reliability comes from running steady on a rated supply of 400 V power. Cooling shows up in the form of B35 surface cooling, matched together with IM B35 foot and flange mounting, so getting it settled in position is not much of a challenge if space isn’t overly tight.

The motor chocolate bars out rated power of 18.5 kW when set up right, though datasheets give the definite answer for special cases. A frequency rating of 50/60 Hz keeps the speed options open, and the max speed lands at 3600 RPM if the right variant is picked up. Running hours do add up but the IP54 protection class lets the housing shrug off most dust and spray from work floors. There’s a BS11 encoder built in for monitoring and a thermal sensor circles in safety against overheating, so the motor stops trouble before it becomes trouble.

Looking at weight, approximately 165 kg gives a sense of heft but also stability, especially in automation lines where vibration isn’t welcome. Interfacing on the mechanical end includes typical foot and flange detection, with power and feedback neatly linked, usually by a sturdy cable set. The A2N1 cooling method runs fairly quiet compared to bulkier ventilators, and that helps keep noise and debris to a minimum around the install zone. Standard automation settings like conveyors, packing arms, or any load that switches on and off often will run smooth and stable, with the 2AD160C series keeping pace without much fuss needed for maintenance.