Product Description:

The 2AD160C-B35OA1-BS03-B2V2 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts electrical energy into rotary motion for automation cells that power spindles, transfer systems, and material-handling axes where continuous torque and moderate starting currents are required. The motor is suited to industrial duty in applications that need steady operation, predictable thermal behavior, and compatibility with closed-loop drive control.

An integrated axial blower moves cooling air along the stator so winding temperature remains stable during sustained duty cycles. The rotor turns on heavy-duty bearings that tolerate radial and axial loads from belt drives or direct-coupled machinery. Position data comes from high-resolution motor feedback, which allows the drive controller to close speed or torque loops with fine granularity. Installation flexibility is provided by flange and foot mounting, so either surface can be fixed to the machine frame without additional adapters. The unit is supplied without a holding brake, so stopping and static load retention must be handled by the drive or an external mechanical lock.

The motor has frame code 160, which indicates a shaft height suited to medium-power drives, while length code C extends the active iron for higher continuous output within the same diameter. Power conductors enter a rugged terminal box located on Side A and positioned at the top of the housing for short cable runs to an overhead tray. This layout leaves the opposite face clear for service access and fits machines that route conduits downward. The shaft is supplied without a seal and is balanced with a full key to reduce runout. Side B remains blank, so coupling is provided only on the drive end. Vibration grade S limits dynamic imbalance, and winding code BS refers to the conductor gauge and insulation system used for thermal class alignment.