2AD160C-B35OA1-BS01-B2N2
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911255123
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD160C-B35OA1-BS01-B2N2 motor belongs to the 2AD 3-Phase Induction Motors series and is constructed with an aluminum frame. It features surface cooling and a rated power of approximately 22 kW. The motor has an IP65 protection class and utilizes a resolver for feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
This industrial module 2AD160C-B35OA1-BS01-B2N2 is developed by Bosch Rexroth Indramat motor brand. Motor series 2AD denotes the family of air-cooled, three-phase induction motors which standardize mounting interfaces and drive compatibility. Its frame size “160” defines shaft diameter and flange bolt pattern, allowing direct coupling to standard gearboxes. “C” represent motor’s length to set the axial footprint which controls enclosure depth and coupling clearance.
The drive with mounting type “B35” provides both flange and foot mounting and increases installation options for varied machine frames. Winding code “OA1” designates the specific winding arrangement which determines current and thermal behavior under rated load. Its feedback “BS01” employs Resolver encoder which supplies continuous angular position information for closed feedback system control. Rated power approx. 22 kW gives the continuous mechanical output which sets inverter and thermal design parameters. The unit operates at a rated voltage of 400 V, specifying the nominal supply that matches common 3-phase industrial mains. Additionally, its rated speed of 1500 rpm fixes the synchronous baseline which guides gearbox ratio and process timing. Cooling via surface cooling method removes heat through external surface convection, thus reduces dependence on forced-air accessories.
The 2AD160C-B35OA1-BS01-B2N2, as the part identifier, maintains a protection class IP65 that provides dust tight and water jet protection to lower enclosure requirements in harsher environments. The frame material aluminum reduces motor mass and eases handling and lowers inertial load on bearings. Resolver feedback encoder offers robust analog feedback and can resist electrical noise and high temperature. Further, the ambient operating range 0 to 40°C limits environmental exposure and hence protects grease life and electrical ratings. The motor’s mechanical bearing lifetime of 20,000 hours defines expected service interval which supports preventive maintenance planning.
Frequently Asked Questions about 2AD160C-B35OA1-BS01-B2N2:
Q: What wiring decisions follow from rated voltage on model 2AD160C-B35OA1-BS01-B2N2?
A: The rated voltage 400 V indicates nominal three-phase supply which aligns with common industrial mains and informs selection of cable insulation and transformer arrangements.
Q: How does feedback BS01 assist control performance in 2AD160C-B35OA1-BS01-B2N2?
A: Feedback “BS01” uses a resolver which provides continuous angular position signals and analog robustness that supports closed loop speed and position control under electrical noise and temperature variations.
Q: How does rated speed influence gear and process design for 2AD160C-B35OA1-BS01-B2N2?
A: Drive’s rated speed of 1500 RPM represents the nominal rotational speed which sets gearbox ratios and process timing. This calculates torque and power distribution across the driven system.
Q: How should rated power be applied when specifying 2AD160C-B35OA1-BS01-B2N2 for a drive?
A: The unit with a rated power of approx. 22 kW sets the continuous mechanical output which determines inverter sizing, conductor cross section and cooling requirements during sustained operation.
Q: Why does surface cooling matter for continuous operation of 2AD160C-B35OA1-BS01-B2N2?
A: The surface cooling removes heat via convection across the induction motor housing, reducing need for additional forced-air blowers
