Product Description:

The 2AD160C-B35LL1-BS13-A2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into continuous shaft torque for conveyors, packaging stations, and general automation axes that use vector-controlled speed regulation. The motor is intended for use with compatible drive controllers so the machine can maintain stable velocity and torque under changing load conditions. This arrangement suits applications that require steady rotary output during continuous operation rather than rapid point-to-point positioning.

The motor uses heavy-duty bearings that support radial and axial loads found in belt or gear transmissions. An integral electrically engaged clamp brake holds the rotor when excitation is removed, which helps prevent drift on vertical or suspended axes. Cooling is provided by a rear-mounted axial blower that moves air along the stator housing during operation. Position and speed data come from high-resolution motor feedback, allowing the drive to correct speed error at low frequencies and follow commanded motion more closely. The housing supports flange and foot mounting, so it can be attached to either a machine face or a base structure.

The motor uses frame size 160 with length code C, which gives it an intermediate housing length within this frame. Power conductors enter through a left-side terminal box, which can help keep cable routing clear of nearby machine elements and guarding. The motor has vibration grade R, which helps limit transmitted vibration during high-speed operation. It is supplied with a smooth drive-end shaft without a seal, and the non-drive end has no secondary shaft extension. This layout supports straightforward mechanical integration when the motor is coupled to a gearbox or pulley drive on the primary shaft end.