2AD160C-B35LA2-BS01/S015
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911228998
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD160C-B35LA2-BS01/S015 is part of the 2AD 3-Phase Induction Motors series and features an axial blower cooling system. This motor supports flange and foot mounting and has an IP65 protection rating. Additionally, it includes a standard bearing type and vibration severity level R.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth’s 2AD160C-B35LA2-BS01/S015 motor is suitable for industrial drive solutions where consistency and accuracy are critical. The motor provides a rated power of 37 kW at a rated torque of 236 Nm. It has a nominal speed of 1500 rpm and a maximum speed of 6000 rpm.
The 2AD160C-B35LA2-BS01/S015 induction motor has a rated current of 90 A (RMS). It operates with a nominal voltage requirement of 299 Volts. The heating time constant of the motor is 65 minutes, which aids in the even distribution of heat when the motor is used continuously. The required conductor cross-section for a reliable electrical connection is 35 mm². An axial blower system occurs and causes the cooling by directing the air to side B and side A, respectively. The blower is powered by 220 VA to keep the airflow steady. It can be connected to 3 x AC 400 V at 50 or 460 V at 60 Hz. The system provides a flow of approximately 1120 m3/h. This maintains the <<2AD160C-B35LA2-BS01/S015 induction motor> at a steady temperature when operating over a long period of time. The feedback instrument that is embedded in the induction motor is high-resolution. It gives a scale of measurement of one unit in two million revolutions. This enables accurate positioning and control. The system maintains absolute accuracy within ±0.02° and relative accuracy within ±0.01 arc minutes.
The <<2AD160C-B35LA2-BS01/S015 induction motor is supplied without a holding brake. The B35 mounting arrangement provides compatibility with flange and foot installations. The left-side (position L) layout is used for the power connection. The direction of output is towards side A. This structure provides assembly and machine integration flexibility. Electrical ratings, detailed feedback capability, and efficient cooling make the motor applicable in industrial automation.
Frequently Asked Questions about 2AD160C-B35LA2-BS01/S015:
Q: What ambient temperature range is recommended for motor operation?
A: The motor is designed to operate between 0°C and +45°C. Staying within this range prevents thermal overloading and maintains insulation integrity over time.
Q: How does installation altitude affect continuous motor performance?
A: The operation is rated up to 1000 meters above sea level. Higher elevations reduce air density, limiting cooling capacity and requiring performance derating.
Q: What humidity conditions are acceptable during motor operation?
A: The motor withstands moderate humidity without performance loss. Excessive condensation should be avoided since it may damage insulation and accelerate corrosion of bearings.
Q: Which protection class applies to the 2AD160C-B35LA2-BS01/S015 motor?
A: This motor is designed with IP65 protection when equipped with sealing elements. This ensures defense against dust penetration and resistance to water spray.
Q: How do vibration environments impact motor service life?
A: The motor complies with vibration severity grade S. This classification allows dependable performance in dynamic machining conditions with minimized wear on bearings.
