2AD160C-B05OB1-BS23-A2N1

Product Description:

2AD160C-B05OB1-BS23-A2N1 is a Bosch Rexroth AC motor from the 2AD family. This series of motors requires ambient temperatures below 40 ⁰C and site elevations below 1000 meters to deliver rated output. Even through these are the optimal conditions, Bosch Rexroth specifies 55 ⁰C and 5000 meters as the upper limits for temperature and site elevation. It must be noted, however, that operating under these elevated conditions causes the motor output power to fall below specified rated values. 2AD160C-B05OB1-BS23-A2N1 is a motor that delivers 37 kilowatts and 236 Nm under optimal operating conditions. The motor’s nominal operating speed is 1500 RPM and its peak operating speed is 6000 RPM. Nominal values for motor voltage and motor current are 299 Volts and 90 Amps. This high-power motor requires cables with a minimum cross-section of 35 mm2.

Using cables smaller than this specified size will lead to unreliable performance and can lead to fire and other safety-related issues. The average noise level of the motor is 75 dB(A) when measured at a distance of 1 meter. This flange-mounted motor has a plain shaft. Operators can order shaft seals, but this option is not available on this motor. High-resolution motor feedback allows accurate control of the motor’s speed and torque. An integrated axial blower is another key feature of the motor that allows it to operate reliably with rated performance. An optional feature that is installed on the motor is an electrically-released holding brake with 70 Nm holding torque. The brake takes 130 milliseconds after receiving the control signal to release the motor shaft. The brake takes 85 milliseconds after receiving the control signal to clamp down on the shaft.