Product Description:

The 2AD160C-B05OB1-BS03-A2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into continuous rotary torque for machining centers, packaging lines, and other axis drives that require steady speed and high duty cycles. When used with a compatible drive controller, it provides the rotary output needed for conveying, indexing, and other automated machine motion. Its induction-motor design is suited to production equipment that must run for long periods under repeatable operating conditions.

Thermal management relies on an axial blower that pushes cooling air along the housing, helping the stator remain within its temperature limits during prolonged loading. Mechanical integration is simplified by flange mounting, and standard bearings support the radial and axial loads imposed by coupled machinery. Position and speed are captured through high-resolution motor feedback, giving the drive controller precise data for vector control and stable regulation during changing loads. The rotor transmits torque through a smooth shaft without a shaft seal, which is suitable for clean installations where added sealing friction is not required. Incoming conductors land in a terminal box, and the power connection enters at the top of the frame with the connection oriented toward side B to simplify cable routing inside the machine.

The motor is delivered without a holding brake, so any load that must remain fixed when power is removed requires external holding force. The housing uses motor size 160, and the active core follows motor length code C, giving the unit a larger mechanical envelope and torque capability than shorter versions in the same platform. Dynamic behavior conforms to vibration grade R, which supports smoother running and reduced transmitted vibration in connected machine elements. The winding designation and rear-face configuration are part of the ordering code and help ensure the motor is matched to the intended electrical and mechanical setup.